add scsi headers scsi.h and sg.h

[musl] / include / scsi / scsi.h

diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
new file mode 100644 (file)
index 0000000..8837f58
--- /dev/null
+++ b/include/scsi/scsi.h
@@ -0,0 +1,150 @@
+#ifndef _SCSI_SCSI_H
+#define _SCSI_SCSI_H
+
+#define TEST_UNIT_READY 0x00
+#define REZERO_UNIT 0x01
+#define REQUEST_SENSE 0x03
+#define FORMAT_UNIT 0x04
+#define READ_BLOCK_LIMITS 0x05
+#define REASSIGN_BLOCKS 0x07
+#define READ_6 0x08
+#define WRITE_6 0x0a
+#define SEEK_6 0x0b
+#define READ_REVERSE 0x0f
+#define WRITE_FILEMARKS 0x10
+#define SPACE 0x11
+#define INQUIRY 0x12
+#define RECOVER_BUFFERED_DATA 0x14
+#define MODE_SELECT 0x15
+#define RESERVE 0x16
+#define RELEASE 0x17
+#define COPY 0x18
+#define ERASE 0x19
+#define MODE_SENSE 0x1a
+#define START_STOP 0x1b
+#define RECEIVE_DIAGNOSTIC 0x1c
+#define SEND_DIAGNOSTIC 0x1d
+#define ALLOW_MEDIUM_REMOVAL 0x1e
+#define SET_WINDOW 0x24
+#define READ_CAPACITY 0x25
+#define READ_10 0x28
+#define WRITE_10 0x2a
+#define SEEK_10 0x2b
+#define WRITE_VERIFY 0x2e
+#define VERIFY 0x2f
+#define SEARCH_HIGH 0x30
+#define SEARCH_EQUAL 0x31
+#define SEARCH_LOW 0x32
+#define SET_LIMITS 0x33
+#define PRE_FETCH 0x34
+#define READ_POSITION 0x34
+#define SYNCHRONIZE_CACHE 0x35
+#define LOCK_UNLOCK_CACHE 0x36
+#define READ_DEFECT_DATA 0x37
+#define MEDIUM_SCAN 0x38
+#define COMPARE 0x39
+#define COPY_VERIFY 0x3a
+#define WRITE_BUFFER 0x3b
+#define READ_BUFFER 0x3c
+#define UPDATE_BLOCK 0x3d
+#define READ_LONG 0x3e
+#define WRITE_LONG 0x3f
+#define CHANGE_DEFINITION 0x40
+#define WRITE_SAME 0x41
+#define READ_TOC 0x43
+#define LOG_SELECT 0x4c
+#define LOG_SENSE 0x4d
+#define MODE_SELECT_10 0x55
+#define RESERVE_10 0x56
+#define RELEASE_10 0x57
+#define MODE_SENSE_10 0x5a
+#define PERSISTENT_RESERVE_IN 0x5e
+#define PERSISTENT_RESERVE_OUT 0x5f
+#define MOVE_MEDIUM 0xa5
+#define READ_12 0xa8
+#define WRITE_12 0xaa
+#define WRITE_VERIFY_12 0xae
+#define SEARCH_HIGH_12 0xb0
+#define SEARCH_EQUAL_12 0xb1
+#define SEARCH_LOW_12 0xb2
+#define READ_ELEMENT_STATUS 0xb8
+#define SEND_VOLUME_TAG 0xb6
+#define WRITE_LONG_2 0xea
+#define GOOD 0x00
+#define CHECK_CONDITION 0x01
+#define CONDITION_GOOD 0x02
+#define BUSY 0x04
+#define INTERMEDIATE_GOOD 0x08
+#define INTERMEDIATE_C_GOOD 0x0a
+#define RESERVATION_CONFLICT 0x0c
+#define COMMAND_TERMINATED 0x11
+#define QUEUE_FULL 0x14
+#define STATUS_MASK 0x3e
+#define NO_SENSE 0x00
+#define RECOVERED_ERROR 0x01
+#define NOT_READY 0x02
+#define MEDIUM_ERROR 0x03
+#define HARDWARE_ERROR 0x04
+#define ILLEGAL_REQUEST 0x05
+#define UNIT_ATTENTION 0x06
+#define DATA_PROTECT 0x07
+#define BLANK_CHECK 0x08
+#define COPY_ABORTED 0x0a
+#define ABORTED_COMMAND 0x0b
+#define VOLUME_OVERFLOW 0x0d
+#define MISCOMPARE 0x0e
+#define TYPE_DISK 0x00
+#define TYPE_TAPE 0x01
+#define TYPE_PROCESSOR 0x03
+#define TYPE_WORM 0x04
+#define TYPE_ROM 0x05
+#define TYPE_SCANNER 0x06
+#define TYPE_MOD 0x07
+#define TYPE_MEDIUM_CHANGER 0x08
+#define TYPE_ENCLOSURE 0x0d
+#define TYPE_NO_LUN 0x7f
+#define COMMAND_COMPLETE 0x00
+#define EXTENDED_MESSAGE 0x01
+#define EXTENDED_MODIFY_DATA_POINTER 0x00
+#define EXTENDED_SDTR 0x01
+#define EXTENDED_EXTENDED_IDENTIFY 0x02
+#define EXTENDED_WDTR 0x03
+#define SAVE_POINTERS 0x02
+#define RESTORE_POINTERS 0x03
+#define DISCONNECT 0x04
+#define INITIATOR_ERROR 0x05
+#define ABORT 0x06
+#define MESSAGE_REJECT 0x07
+#define NOP 0x08
+#define MSG_PARITY_ERROR 0x09
+#define LINKED_CMD_COMPLETE 0x0a
+#define LINKED_FLG_CMD_COMPLETE 0x0b
+#define BUS_DEVICE_RESET 0x0c
+#define INITIATE_RECOVERY 0x0f
+#define RELEASE_RECOVERY 0x10
+#define SIMPLE_QUEUE_TAG 0x20
+#define HEAD_OF_QUEUE_TAG 0x21
+#define ORDERED_QUEUE_TAG 0x22
+#define SCSI_IOCTL_GET_IDLUN 0x5382
+#define SCSI_IOCTL_TAGGED_ENABLE 0x5383
+#define SCSI_IOCTL_TAGGED_DISABLE 0x5384
+#define SCSI_IOCTL_PROBE_HOST 0x5385
+#define SCSI_IOCTL_GET_BUS_NUMBER 0x5386
+
+struct ccs_modesel_head {
+       unsigned char _r1;
+       unsigned char medium;
+       unsigned char _r2;
+       unsigned char block_desc_length;
+       unsigned char density;
+       unsigned char number_blocks_hi;
+       unsigned char number_blocks_med;
+       unsigned char number_blocks_lo;
+       unsigned char _r3;
+       unsigned char block_length_hi;
+       unsigned char block_length_med;
+       unsigned char block_length_lo;
+};
+
+#endif
+