-/* Copyright (C) 1998 - 2000 by Universitaet Karlsruhe
-* All rights reserved.
-*
-* Authors: Christian Schaefer
-*
-* irflag --- optimization flags
-*/
+/*
+ * Project: libFIRM
+ * File name: ir/ir/irflag.h
+ * Purpose: Flags to control optimizations.
+ * Author: Christian Schaefer, Goetz Lindenmaier
+ * Modified by:
+ * Created:
+ * CVS-ID: $Id$
+ * Copyright: (c) 1999-2003 Universität Karlsruhe
+ * Licence: This file protected by GPL - GNU GENERAL PUBLIC LICENSE.
+ */
-/* $Id$ */
+/**
+ * @file irflag.h
+ *
+ * Optimization flags.
+ *
+ * @author Christian Schaefer
+ */
#ifndef _IRFLAG_H_
#define _IRFLAG_H_
+/**
+ * A container type to load/restore all optimizations
+ */
+typedef unsigned optimization_state_t;
+
/**
* This function enables/disables optimizations globally.
*
* Default: optimize == 1.
*/
void set_optimize (int value);
-/** Returns global optimization setting */
-int get_optimize (void);
+int get_optimize(void);
/** Enables/Disables constant folding optimization.
*
* Default: opt_constant_folding == 1.
*/
void set_opt_constant_folding (int value);
-/** Returns constant folding optimization setting. */
-int get_opt_constant_folding (void);
+
+/** Enables/Disables removal of redundant Loads and Stores.
+ *
+ * - Remove Store that overwrites a just stored value (WAW).
+ * - Remove Store if it stores a value just loaded (WAR with the same value).
+ * - Remove Load that loads a value just saved (RAW with the same value).
+ */
+void set_opt_redundant_LoadStore(int value);
/** Enables/Disables constant subexpression elimination.
*
* Default: opt_cse == 1.
*/
void set_opt_cse (int value);
-/** Returns constant subexpression elimination setting. */
-int get_opt_cse (void);
/** Enables/Disables global constant subexpression elimination.
*
* If opt_global_cse == 1 and opt_cse == 1 perform intra procedure
* constant subexpression elimination for floating nodes. Intra
* procedure cse gets the graph into state "floating". It is necessary
- * to run pre/code motion to get the graph back into state "pinned".
- * Default: opt_global_cse == 1.
+ * to run pre/code motion to get the graph back into state "op_pin_state_pinned".
+ * right after a call to local_optimize with global cse turned on.
+ * Default: opt_global_cse == 0.
*/
void set_opt_global_cse (int value);
-/** Returns global constant subexpression elimination setting. */
-int get_opt_global_cse (void);
-/** Enables/Disables unreachble code elimination.
+/** Enables/Disables strength reduction.
+ *
+ * If opt_strength_red == 1 perform strength reduction.
+ * See strenth_red.h.
+ *
+ * Default: opt_strength_red = 1;
+ */
+void set_opt_strength_red (int value);
+
+/** Enables/Disables unreachable code elimination.
+ *
+ * If set, evaluate conditions of conditional branch and replace the
+ * branch with a Jmp/Bad Tuple.
*
* If opt_unreachable_code == 1 replace nodes (except Block,
* Phi and Tuple) with a Bad predecessor by the Bad node.
* Default: opt_unreachable_code == 1.
*/
void set_opt_unreachable_code(int value);
-/** Returns unreachble code elimination setting. */
-int get_opt_unreachable_code(void);
/** Enables/Disables control flow optimizations.
*
* Performs Straightening, if simplifications and loop simplifications.
* Sets all separate control flow flags (control_flow_straightening,
- * weak_simplification and strong_simplification).
+ * weak_simplification, strong_simplification and critical_edges).
*/
void set_opt_control_flow(int value);
/** Enables/Disables Straightening. */
void set_opt_control_flow_straightening(int value);
-/** Returns Straightening setting. */
-int get_opt_control_flow_straightening(void);
/** Enables/Disables if simplifications in local optimizations. */
void set_opt_control_flow_weak_simplification(int value);
-/** Returns if simplifications in local optimizations setting. */
-int get_opt_control_flow_weak_simplification(void);
/** Enables/Disables strong if and loop simplification (in optimize_cf). */
void set_opt_control_flow_strong_simplification(int value);
-/** Returns strong if and loop simplification setting */
-int get_opt_control_flow_strong_simplification(void);
+
+/** Enables/Disables removal of critical control flow edges. */
+void set_opt_critical_edges(int value);
/** Enables/Disables reassociation.
*
* Default: opt_reassociation == 1.
*/
void set_opt_reassociation(int value);
-/** Returns reassociation setting. */
-int get_opt_reassociation(void);
/** Enables/Disables dead node elimination.
*
* by copying the firm graph.
* Default: opt_dead_node_elimination == 1. */
void set_opt_dead_node_elimination (int value);
-/** Returns dead node elimination setting. */
-int get_opt_dead_node_elimination (void);
+
+/** Enables/Disables dead method elimination.
+ *
+ * If opt_dead_method_elimination == 1 methods never called are
+ * removed.
+ * Default: opt_dead_method_elimination == 1. */
+void set_opt_dead_method_elimination (int value);
+void set_opt_dead_method_elimination_verbose (int value);
/** Enable/Disables inlining.
*
* If opt_inline == 1 the inlining transformation is performed.
*/
void set_opt_inline (int value);
-/** Returns inlining setting. */
-int get_opt_inline (void);
+
+/** Enable/Disable optimization of dynamic method dispatch
+ *
+ * This flag enables/disables the optimization of dynamic method dispatch.
+ * If the flag is turned on Sel nodes can be replaced by Const nodes representing
+ * the address of a function.
+ */
+void set_opt_dyn_meth_dispatch (int value);
+
+/** Enable/Disable optimization of tail-recursion calls.
+ *
+ * This flag enables/disables the optimization tail-recursion call.
+ * If the flag is turned on tail-recursion calls are optimized into loops.
+ */
+void set_opt_tail_recursion(int value);
+
+
+/** Enable/Disable normalizations of the firm representation.
+ *
+ * This flag guards transformations that normalize the firm representation
+ * as removing Ids and Tuples, useless Phis, replacing SymConst(id) by
+ * Const(entity) and others.
+ * The transformations guarded by this flag are not guarded by flag
+ * "optimize".
+ * Many algorithms operating on firm can not deal with constructs in
+ * the non-normalized representation.
+ * default: 1
+ * @@@ ATTENTION: not all such transformations are guarded by a flag.
+ */
+void set_opt_normalize (int value);
+
+
+/** Enable/Disable precise exception context. */
+void set_opt_precise_exc_context(int value);
+
+/**
+ * Save the current optimization state.
+ */
+void save_optimization_state(optimization_state_t *state);
+
+/**
+ * Restore the current optimization state.
+ */
+void restore_optimization_state(const optimization_state_t *state);
#endif