-/* Copyright (C) 1998 - 2000 by Universitaet Karlsruhe
-** All rights reserved.
-**
-** Authors: Christian Schaefer
-**
-** irflag --- optimization flags
-*/
+/*
+ * Project: libFIRM
+ * File name: ir/ir/irflag.h
+ * Purpose: Flags to control optimizations.
+ * Author: Christian Schaefer, Goetz Lindenmaier
+ * Modified by: Michael Beck
+ * Created:
+ * CVS-ID: $Id$
+ * Copyright: (c) 1999-2003 Universität Karlsruhe
+ * Licence: This file protected by GPL - GNU GENERAL PUBLIC LICENSE.
+ */
-/* $Id$ */
+/**
+ * @file irflag.h
+ *
+ * Flags to customize the behaviour of libfirm.
+ *
+ * @author Christian Schaefer
+ *
+ * There are the following groups of flags:
+ * 1. Optimization flags.
+ * a) There is a flag, 'optimize' to turn on/off all optimizations.
+ * b) There are flags for each individual optimization. Some flags turns
+ * transformations in several algorithms on/off.
+ * 2. Normalization flags.
+ * These flags steer transformations of the ir that improve it, as removing
+ * dump Phi nodes (one predecessor, all preds are equal ...), Ids, Tuples ...
+ * 3. Verbosity flags.
+ * a) Flags to steer the level of the information.
+ * b) Flags to steer in which phase information should be dumped.
+ *
+ */
#ifndef _IRFLAG_H_
#define _IRFLAG_H_
-/* If optimize == 0 no optimizations are performed.
- Default: optimize == 1. */
+/**
+ * A container type to load/restore all optimizations
+ */
+typedef unsigned optimization_state_t;
+
+/**
+ * This function enables/disables optimizations globally.
+ *
+ * If optimize == 0 no optimizations are performed at all.
+ * Default: optimize == 1.
+ */
void set_optimize (int value);
-int get_optimize (void);
-
-/* If opt_constant_folding == 1 perform
- - constant expression evaluation (2 + 5 ==> 7, 3 < 2 ==> false)
- - algebraic simplification (a * 0 ==> 0, a or a ==> a)
- - simplification of tests ( !(a < b) ==> (a >= b))
- - merging single exit with single entry blocks
- - unreachable code elimination
- - refining the memory representation
- - remove store after load
- Default: opt_constant_folding == 1. */
+int get_optimize(void);
+
+/** This function enables/disables output of information about phases and
+ * controls the verbosity level.
+ *
+ * 0: no output at all.
+ * 1: very short output
+ * >>1: very verbose output.
+ */
+void set_firm_verbosity (int value);
+int get_firm_verbosity (void);
+
+/** Enables/Disables constant folding optimization.
+ *
+ * If opt_constant_folding == 1 perform
+ * - constant expression evaluation (2 + 5 ==> 7, 3 < 2 ==> false)
+ * - algebraic simplification (a * 0 ==> 0, a or a ==> a)
+ * - simplification of tests ( !(a < b) ==> (a >= b))
+ * - refining the memory representation
+ * - remove store after load
+ * Default: opt_constant_folding == 1.
+ */
void set_opt_constant_folding (int value);
-int get_opt_constant_folding (void);
-/* If opt_cse == 1 perform constant subexpression elimination.
- Default: opt_cse == 1. */
+/** Enables/Disables removal of redundant Loads and Stores.
+ *
+ * - Remove Store that overwrites a just stored value (WAW).
+ * - Remove Store if it stores a value just loaded (WAR with the same value).
+ * - Remove Load that loads a value just saved (RAW with the same value).
+ */
+void set_opt_redundant_LoadStore(int value);
+
+/** Enables/Disables constant subexpression elimination.
+ *
+ * If opt_cse == 1 perform constant subexpression elimination.
+ * Default: opt_cse == 1.
+ */
void set_opt_cse (int value);
-int get_opt_cse (void);
-/* If opt_global_cse == 1 and opt_cse == 1 perform intra procedure
- constant subexpression elimination for floating nodes. Intra
- procedure cse gets the graph into state "floating". It is necessary
- to run pre/code motion to get the graph back into state "pinned".
- Default: opt_global_cse == 1. */
+/** Enables/Disables global constant subexpression elimination.
+ *
+ * If opt_global_cse == 1 and opt_cse == 1 perform intra procedure
+ * constant subexpression elimination for floating nodes. Intra
+ * procedure cse gets the graph into state "floating". It is necessary
+ * to run pre/code motion to get the graph back into state "op_pin_state_pinned".
+ * right after a call to local_optimize with global cse turned on.
+ * Default: opt_global_cse == 0.
+ */
void set_opt_global_cse (int value);
-int get_opt_global_cse (void);
-/* If opt_unreachable_code == 1 replace nodes (except Block,
- Phi and Tuple) with a Bad predecessor by the Bad node.
- Default: opt_unreachable_code == 1. */
+/** Enables/Disables strength reduction.
+ *
+ * If opt_strength_red == 1 perform strength reduction.
+ * See strenth_red.h.
+ *
+ * Default: opt_strength_red = 1;
+ */
+void set_opt_strength_red (int value);
+
+/** Enables/Disables output of information about strength reduction.
+ */
+void set_opt_strength_red_verbose (int value);
+
+/** Enables/Disables unreachable code elimination.
+ *
+ * If set, evaluate conditions of conditional branch and replace the
+ * branch with a Jmp/Bad Tuple.
+ *
+ * If opt_unreachable_code == 1 replace nodes (except Block,
+ * Phi and Tuple) with a Bad predecessor by the Bad node.
+ * Default: opt_unreachable_code == 1.
+ */
void set_opt_unreachable_code(int value);
-int get_opt_unreachable_code(void);
-/* Performs Straightening, if simplifications and loop simplifications. */
+/** Enables/Disables control flow optimizations.
+ *
+ * Performs Straightening, if simplifications and loop simplifications.
+ * Sets all separate control flow flags (control_flow_straightening,
+ * weak_simplification, strong_simplification and critical_edges).
+ */
void set_opt_control_flow(int value);
-int get_opt_control_flow(void);
-/* If opt_reassociation == 1 reassociation is performed.
- Default: opt_reassociation == 1. */
+/** Enables/Disables Straightening. */
+void set_opt_control_flow_straightening(int value);
+
+/** Enables/Disables if simplifications in local optimizations. */
+void set_opt_control_flow_weak_simplification(int value);
+
+/** Enables/Disables strong if and loop simplification (in optimize_cf). */
+void set_opt_control_flow_strong_simplification(int value);
+
+/** Enables/Disables removal of critical control flow edges. */
+void set_opt_critical_edges(int value);
+
+/** Enables/Disables reassociation.
+ *
+ * If opt_reassociation == 1 reassociation is performed.
+ * Default: opt_reassociation == 1.
+ */
void set_opt_reassociation(int value);
-int get_opt_reassociation(void);
-/* If opt_dead_node_elimination == 1 deallocate all dead nodes
- by copying the firm graph.
- Default: opt_dead_node_elimination == 0. @@@ as buggy, else 1. */
+/** Enables/Disables dead node elimination.
+ *
+ * If opt_dead_node_elimination == 1 deallocate all dead nodes
+ * by copying the firm graph.
+ * Default: opt_dead_node_elimination == 1. */
void set_opt_dead_node_elimination (int value);
-int get_opt_dead_node_elimination (void);
-/* If opt_inline == 1 the inlining transformation is performed. */
+/** Enables/Disables dead method elimination.
+ *
+ * If opt_dead_method_elimination == 1 methods never called are
+ * removed.
+ * Default: opt_dead_method_elimination == 1. */
+void set_opt_dead_method_elimination (int value);
+void set_opt_dead_method_elimination_verbose (int value);
+
+/** Enable/Disables inlining.
+ *
+ * If opt_inline == 1 the inlining transformation is performed.
+ */
void set_opt_inline (int value);
-int get_opt_inline (void);
+
+/** Enable/Disable optimization of dynamic method dispatch
+ *
+ * This flag enables/disables the optimization of dynamic method dispatch.
+ * If the flag is turned on Sel nodes can be replaced by Const nodes representing
+ * the address of a function.
+ */
+void set_opt_dyn_meth_dispatch (int value);
+
+/** Enable/Disable optimization of tail-recursion calls.
+ *
+ * This flag enables/disables the optimization tail-recursion call.
+ * If the flag is turned on tail-recursion calls are optimized into loops.
+ */
+void set_opt_tail_recursion(int value);
+void set_opt_tail_recursion_verbose(int value);
+
+void set_opt_fragile_ops(int value);
+
+
+/** Enable/Disable normalizations of the firm representation.
+ *
+ * This flag guards transformations that normalize the firm representation
+ * as removing Ids and Tuples, useless Phis, replacing SymConst(id) by
+ * Const(entity) and others.
+ * The transformations guarded by this flag are not guarded by flag
+ * "optimize".
+ * Many algorithms operating on firm can not deal with constructs in
+ * the non-normalized representation.
+ * default: 1
+ * @@@ ATTENTION: not all such transformations are guarded by a flag.
+ */
+void set_opt_normalize (int value);
+
+
+/** Enable/Disable precise exception context. */
+void set_opt_precise_exc_context(int value);
+
+/**
+ * Save the current optimization state.
+ */
+void save_optimization_state(optimization_state_t *state);
+
+/**
+ * Restore the current optimization state.
+ */
+void restore_optimization_state(const optimization_state_t *state);
#endif