#include "ircons.h"
#include "debug.h"
-#include "irhooks.h"
#include "xmalloc.h"
#include "irnodeset.h"
#include "irnodemap.h"
#undef KEEP_ALIVE_COPYKEEP_HACK
+DEBUG_ONLY(static firm_dbg_module_t *dbg;)
+DEBUG_ONLY(static firm_dbg_module_t *dbg_constr;)
+DEBUG_ONLY(static firm_dbg_module_t *dbg_permmove;)
+
/** Associates an ir_node with it's copy and CopyKeep. */
typedef struct {
ir_nodeset_t copies; /**< all non-spillable copies of this irn */
be_irg_t *birg;
ir_nodemap_t op_set;
struct obstack obst;
- DEBUG_ONLY(firm_dbg_module_t *dbg;)
} constraint_env_t;
/** Lowering walker environment. */
typedef struct _lower_env_t {
be_irg_t *birg;
unsigned do_copy : 1;
- DEBUG_ONLY(firm_dbg_module_t *dbg_module;)
} lower_env_t;
/** Holds a Perm register pair. */
perm_type_t type; /**< type (CHAIN or CYCLE) */
} perm_cycle_t;
-/** Compare the in registers of two register pairs. */
-static int compare_reg_pair(const void *a, const void *b) {
- const reg_pair_t *pair_a = a;
- const reg_pair_t *pair_b = b;
-
- if (pair_a->in_reg->index > pair_b->in_reg->index)
- return 1;
- else
- return -1;
-}
-
/** returns the number register pairs marked as checked. */
-static int get_n_checked_pairs(reg_pair_t *pairs, int n) {
- int i, n_checked = 0;
+static int get_n_unchecked_pairs(reg_pair_t const *const pairs, int const n)
+{
+ int n_unchecked = 0;
+ int i;
for (i = 0; i < n; i++) {
- if (pairs[i].checked)
- n_checked++;
+ if (!pairs[i].checked)
+ n_unchecked++;
}
- return n_checked;
+ return n_unchecked;
}
/**
}
/**
- * Gets the index in the register pair array where the in/out register
+ * Gets the index in the register pair array where the in register
* corresponds to reg_idx.
*
* @param pairs The array of register pairs
* @param n The number of pairs
* @param reg The register index to look for
- * @param in_out 0 == look for IN register, 1 == look for OUT register
+ *
* @return The corresponding index in pairs or -1 if not found
*/
-static int get_pairidx_for_regidx(reg_pair_t *pairs, int n, int reg_idx, int in_out) {
+static int get_pairidx_for_in_regidx(reg_pair_t *pairs, int n, unsigned reg_idx) {
int i;
- if (in_out) {
- for (i = 0; i < n; i++) {
- /* out register matches */
- if ((int) pairs[i].out_reg->index == reg_idx)
- return i;
- }
- }
- else {
- for (i = 0; i < n; i++) {
- /* in register matches */
- if ((int) pairs[i].in_reg->index == reg_idx)
- return i;
- }
+ for (i = 0; i < n; i++) {
+ /* in register matches */
+ if (pairs[i].in_reg->index == reg_idx)
+ return i;
}
+ return -1;
+}
+/**
+ * Gets the index in the register pair array where the out register
+ * corresponds to reg_idx.
+ *
+ * @param pairs The array of register pairs
+ * @param n The number of pairs
+ * @param reg The register index to look for
+ *
+ * @return The corresponding index in pairs or -1 if not found
+ */
+static int get_pairidx_for_out_regidx(reg_pair_t *pairs, int n, unsigned reg_idx) {
+ int i;
+
+ for (i = 0; i < n; i++) {
+ /* out register matches */
+ if (pairs[i].out_reg->index == reg_idx)
+ return i;
+ }
return -1;
}
/**
- * Gets an array of register pairs and tries to identify a cycle or chain starting
- * at position start.
+ * Gets an array of register pairs and tries to identify a cycle or chain
+ * starting at position start.
+ *
+ * @param cycle Variable to hold the cycle
+ * @param pairs Array of register pairs
+ * @param n length of the pairs array
+ * @param start Index to start
*
- * @param cycle Variable to hold the cycle
- * @param pairs Array of register pairs
- * @param start Index to start
* @return The cycle or chain
*/
-static perm_cycle_t *get_perm_cycle(perm_cycle_t *cycle, reg_pair_t *pairs, int n, int start) {
- int head = pairs[start].in_reg->index;
- int cur_idx = pairs[start].out_reg->index;
- int cur_pair_idx = start;
- int n_pairs_done = get_n_checked_pairs(pairs, n);
- int idx;
- perm_type_t cycle_tp = PERM_CYCLE;
+static void get_perm_cycle(perm_cycle_t *const cycle,
+ reg_pair_t *const pairs,
+ int const n,
+ int start)
+{
+ int head = pairs[start].in_reg->index;
+ int cur_idx = pairs[start].out_reg->index;
+ int const n_pairs_todo = get_n_unchecked_pairs(pairs, n);
+ perm_type_t cycle_tp = PERM_CYCLE;
+ int idx;
/* We could be right in the middle of a chain, so we need to find the start */
while (head != cur_idx) {
/* goto previous register in cycle or chain */
- cur_pair_idx = get_pairidx_for_regidx(pairs, n, head, 1);
+ int const cur_pair_idx = get_pairidx_for_out_regidx(pairs, n, head);
if (cur_pair_idx < 0) {
cycle_tp = PERM_CHAIN;
break;
- }
- else {
+ } else {
head = pairs[cur_pair_idx].in_reg->index;
start = cur_pair_idx;
}
}
/* assume worst case: all remaining pairs build a cycle or chain */
- cycle->elems = XMALLOCNZ(const arch_register_t*, (n - n_pairs_done) * 2);
+ cycle->elems = XMALLOCNZ(const arch_register_t*, n_pairs_todo * 2);
cycle->n_elems = 2; /* initial number of elements is 2 */
cycle->elems[0] = pairs[start].in_reg;
cycle->elems[1] = pairs[start].out_reg;
/* check for cycle or end of a chain */
while (cur_idx != head) {
/* goto next register in cycle or chain */
- cur_pair_idx = get_pairidx_for_regidx(pairs, n, cur_idx, 0);
+ int const cur_pair_idx = get_pairidx_for_in_regidx(pairs, n, cur_idx);
if (cur_pair_idx < 0)
break;
if (cur_idx != head) {
cycle->elems[idx++] = pairs[cur_pair_idx].out_reg;
cycle->n_elems++;
- }
- else {
+ } else {
/* we are there where we started -> CYCLE */
cycle->type = PERM_CYCLE;
}
/* mark all pairs having one in/out register with cycle in common as checked */
for (idx = 0; idx < cycle->n_elems; idx++) {
- cur_pair_idx = get_pairidx_for_regidx(pairs, n, cycle->elems[idx]->index, 0);
+ int cur_pair_idx;
+ cur_pair_idx = get_pairidx_for_in_regidx(pairs, n, cycle->elems[idx]->index);
if (cur_pair_idx >= 0)
pairs[cur_pair_idx].checked = 1;
- cur_pair_idx = get_pairidx_for_regidx(pairs, n, cycle->elems[idx]->index, 1);
-
+ cur_pair_idx = get_pairidx_for_out_regidx(pairs, n, cycle->elems[idx]->index);
if (cur_pair_idx >= 0)
pairs[cur_pair_idx].checked = 1;
}
-
- return cycle;
}
/**
*
* @param irn The perm node
* @param block The block the perm node belongs to
- * @param walk_env The environment
+ * @param env The lowerer environment
*/
-static void lower_perm_node(ir_node *irn, void *walk_env) {
- ir_graph *irg = get_irn_irg(irn);
- const arch_register_class_t *reg_class;
- lower_env_t *env = walk_env;
- int keep_perm = 0;
- int n, i, pn, do_copy, j, n_ops;
- reg_pair_t *pairs;
- const ir_edge_t *edge;
- ir_node *sched_point, *block, *in[2];
- ir_node *arg1, *arg2, *res1, *res2;
- ir_node *cpyxchg = NULL;
- DEBUG_ONLY(firm_dbg_module_t *mod;)
-
- do_copy = env->do_copy;
- DEBUG_ONLY(mod = env->dbg_module;)
- block = get_nodes_block(irn);
-
- /*
- Get the schedule predecessor node to the perm
- NOTE: This works with auto-magic. If we insert the
- new copy/exchange nodes after this node, everything
- should be ok.
- */
- sched_point = sched_prev(irn);
- DBG((mod, LEVEL_1, "perm: %+F\n", irn));
- DBG((mod, LEVEL_1, "sched point is %+F\n", sched_point));
+static void lower_perm_node(ir_node *irn, lower_env_t *env)
+{
+ const arch_register_class_t *const reg_class = arch_get_irn_register(get_irn_n(irn, 0))->reg_class;
+ ir_graph *const irg = get_irn_irg(irn);
+ ir_node *const block = get_nodes_block(irn);
+ int const arity = get_irn_arity(irn);
+ reg_pair_t *const pairs = ALLOCAN(reg_pair_t, arity);
+ int keep_perm = 0;
+ int do_copy = env->do_copy;
+ /* Get the schedule predecessor node to the perm.
+ * NOTE: This works with auto-magic. If we insert the new copy/exchange
+ * nodes after this node, everything should be ok. */
+ ir_node * sched_point = sched_prev(irn);
+ const ir_edge_t * edge;
+ const ir_edge_t * next;
+ int n;
+ int i;
+
+ DBG((dbg, LEVEL_1, "perm: %+F, sched point is %+F\n", irn, sched_point));
assert(sched_point && "Perm is not scheduled or has no predecessor");
- n = get_irn_arity(irn);
- assert(n == get_irn_n_edges(irn) && "perm's in and out numbers different");
-
- reg_class = arch_get_irn_register(get_irn_n(irn, 0))->reg_class;
- pairs = alloca(n * sizeof(pairs[0]));
+ assert(arity == get_irn_n_edges(irn) && "perm's in and out numbers different");
/* build the list of register pairs (in, out) */
- i = 0;
- foreach_out_edge(irn, edge) {
- pairs[i].out_node = get_edge_src_irn(edge);
- pn = get_Proj_proj(pairs[i].out_node);
- pairs[i].in_node = get_irn_n(irn, pn);
-
- pairs[i].in_reg = arch_get_irn_register(pairs[i].in_node);
- pairs[i].out_reg = arch_get_irn_register(pairs[i].out_node);
+ n = 0;
+ foreach_out_edge_safe(irn, edge, next) {
+ ir_node *const out = get_edge_src_irn(edge);
+ long const pn = get_Proj_proj(out);
+ ir_node *const in = get_irn_n(irn, pn);
+ arch_register_t const *const in_reg = arch_get_irn_register(in);
+ arch_register_t const *const out_reg = arch_get_irn_register(out);
+ reg_pair_t * pair;
+
+ if (in_reg == out_reg) {
+ DBG((dbg, LEVEL_1, "%+F removing equal perm register pair (%+F, %+F, %s)\n",
+ irn, in, out, out_reg->name));
+ exchange(out, in);
+ continue;
+ }
- pairs[i].checked = 0;
- i++;
+ pair = &pairs[n++];
+ pair->in_node = in;
+ pair->in_reg = arch_get_irn_register(in);
+ pair->out_node = out;
+ pair->out_reg = arch_get_irn_register(out);
+ pair->checked = 0;
}
- /* sort the register pairs by the indices of the in registers */
- qsort(pairs, n, sizeof(pairs[0]), compare_reg_pair);
-
- /* Mark all equal pairs as checked, and exchange the OUT proj with
- the IN node. */
- for (i = 0; i < n; i++) {
- if (pairs[i].in_reg->index == pairs[i].out_reg->index) {
- DBG((mod, LEVEL_1, "%+F removing equal perm register pair (%+F, %+F, %s)\n",
- irn, pairs[i].in_node, pairs[i].out_node, pairs[i].out_reg->name));
-
- /* reroute the edges from the proj to the argument */
- exchange(pairs[i].out_node, pairs[i].in_node);
-
- pairs[i].checked = 1;
- }
- }
+ DBG((dbg, LEVEL_1, "%+F has %d unresolved constraints\n", irn, n));
/* Set do_copy to 0 if it's on but we have no free register */
+ /* TODO check for free register */
if (do_copy) {
do_copy = 0;
}
/* check for cycles and chains */
- while (get_n_checked_pairs(pairs, n) < n) {
- perm_cycle_t *cycle;
-
- i = n_ops = 0;
+ while (get_n_unchecked_pairs(pairs, n) > 0) {
+ perm_cycle_t cycle;
+ int j;
/* go to the first not-checked pair */
- while (pairs[i].checked) i++;
- cycle = XMALLOCZ(perm_cycle_t);
- cycle = get_perm_cycle(cycle, pairs, n, i);
+ for (i = 0; pairs[i].checked; ++i) {}
+ get_perm_cycle(&cycle, pairs, n, i);
- DB((mod, LEVEL_1, "%+F: following %s created:\n ", irn, cycle->type == PERM_CHAIN ? "chain" : "cycle"));
- for (j = 0; j < cycle->n_elems; j++) {
- DB((mod, LEVEL_1, " %s", cycle->elems[j]->name));
+ DB((dbg, LEVEL_1, "%+F: following %s created:\n ", irn, cycle.type == PERM_CHAIN ? "chain" : "cycle"));
+ for (j = 0; j < cycle.n_elems; j++) {
+ DB((dbg, LEVEL_1, " %s", cycle.elems[j]->name));
}
- DB((mod, LEVEL_1, "\n"));
-
- /*
- We don't need to do anything if we have a Perm with two
- elements which represents a cycle, because those nodes
- already represent exchange nodes
- */
- if (n == 2 && cycle->type == PERM_CYCLE) {
- free(cycle);
+ DB((dbg, LEVEL_1, "\n"));
+
+ if (cycle.type == PERM_CYCLE && arity == 2) {
+ /* We don't need to do anything if we have a Perm with two elements
+ * which represents a cycle, because those nodes already represent
+ * exchange nodes */
keep_perm = 1;
- continue;
- }
+ } else {
+ /* TODO: - iff PERM_CYCLE && do_copy -> determine free temp reg and
+ * insert copy to/from it before/after the copy cascade (this
+ * reduces the cycle into a chain) */
+
+ /* build copy/swap nodes from back to front */
+ for (i = cycle.n_elems - 2; i >= 0; i--) {
+ ir_node *arg1 = get_node_for_in_register(pairs, n, cycle.elems[i]);
+ ir_node *arg2 = get_node_for_in_register(pairs, n, cycle.elems[i + 1]);
+
+ ir_node *res1 = get_node_for_out_register(pairs, n, cycle.elems[i]);
+ ir_node *res2 = get_node_for_out_register(pairs, n, cycle.elems[i + 1]);
+ /* If we have a cycle and don't copy: we need to create exchange
+ * nodes
+ * NOTE: An exchange node is a perm node with 2 INs and 2 OUTs
+ * IN_1 = in node with register i
+ * IN_2 = in node with register i + 1
+ * OUT_1 = out node with register i + 1
+ * OUT_2 = out node with register i */
+ if (cycle.type == PERM_CYCLE && !do_copy) {
+ ir_node *in[2];
+ ir_node *cpyxchg;
+
+ in[0] = arg1;
+ in[1] = arg2;
+
+ /* At this point we have to handle the following problem:
+ *
+ * If we have a cycle with more than two elements, then this
+ * could correspond to the following Perm node:
+ *
+ * +----+ +----+ +----+
+ * | r1 | | r2 | | r3 |
+ * +-+--+ +-+--+ +--+-+
+ * | | |
+ * | | |
+ * +-+--------+---------+-+
+ * | Perm |
+ * +-+--------+---------+-+
+ * | | |
+ * | | |
+ * +-+--+ +-+--+ +--+-+
+ * |Proj| |Proj| |Proj|
+ * | r2 | | r3 | | r1 |
+ * +----+ +----+ +----+
+ *
+ * This node is about to be split up into two 2x Perm's for
+ * which we need 4 Proj's and the one additional Proj of the
+ * first Perm has to be one IN of the second. So in general
+ * we need to create one additional Proj for each "middle"
+ * Perm and set this to one in node of the successor Perm. */
+
+ DBG((dbg, LEVEL_1, "%+F creating exchange node (%+F, %s) and (%+F, %s) with\n",
+ irn, arg1, cycle.elems[i]->name, arg2, cycle.elems[i + 1]->name));
+ DBG((dbg, LEVEL_1, "%+F (%+F, %s) and (%+F, %s)\n",
+ irn, res1, cycle.elems[i]->name, res2, cycle.elems[i + 1]->name));
+
+ cpyxchg = be_new_Perm(reg_class, irg, block, 2, in);
+
+ if (i > 0) {
+ /* cycle is not done yet */
+ int pidx = get_pairidx_for_in_regidx(pairs, n, cycle.elems[i]->index);
+
+ /* create intermediate proj */
+ res1 = new_r_Proj(irg, block, cpyxchg, get_irn_mode(res1), 0);
+
+ /* set as in for next Perm */
+ pairs[pidx].in_node = res1;
+ }
-//TODO: - iff PERM_CYCLE && do_copy -> determine free temp reg and insert copy to/from it before/after
-// the copy cascade (this reduces the cycle into a chain)
-
- /* build copy/swap nodes from back to front */
- for (i = cycle->n_elems - 2; i >= 0; i--) {
- arg1 = get_node_for_in_register(pairs, n, cycle->elems[i]);
- arg2 = get_node_for_in_register(pairs, n, cycle->elems[i + 1]);
-
- res1 = get_node_for_out_register(pairs, n, cycle->elems[i]);
- res2 = get_node_for_out_register(pairs, n, cycle->elems[i + 1]);
- /*
- If we have a cycle and don't copy: we need to create exchange nodes
- NOTE: An exchange node is a perm node with 2 INs and 2 OUTs
- IN_1 = in node with register i
- IN_2 = in node with register i + 1
- OUT_1 = out node with register i + 1
- OUT_2 = out node with register i
- */
- if (cycle->type == PERM_CYCLE && !do_copy) {
- in[0] = arg1;
- in[1] = arg2;
-
- /* At this point we have to handle the following problem: */
- /* */
- /* If we have a cycle with more than two elements, then */
- /* this could correspond to the following Perm node: */
- /* */
- /* +----+ +----+ +----+ */
- /* | r1 | | r2 | | r3 | */
- /* +-+--+ +-+--+ +--+-+ */
- /* | | | */
- /* | | | */
- /* +-+--------+---------+-+ */
- /* | Perm | */
- /* +-+--------+---------+-+ */
- /* | | | */
- /* | | | */
- /* +-+--+ +-+--+ +--+-+ */
- /* |Proj| |Proj| |Proj| */
- /* | r2 | | r3 | | r1 | */
- /* +----+ +----+ +----+ */
- /* */
- /* This node is about to be split up into two 2x Perm's */
- /* for which we need 4 Proj's and the one additional Proj */
- /* of the first Perm has to be one IN of the second. So in */
- /* general we need to create one additional Proj for each */
- /* "middle" Perm and set this to one in node of the successor */
- /* Perm. */
-
- DBG((mod, LEVEL_1, "%+F creating exchange node (%+F, %s) and (%+F, %s) with\n",
- irn, arg1, cycle->elems[i]->name, arg2, cycle->elems[i + 1]->name));
- DBG((mod, LEVEL_1, "%+F (%+F, %s) and (%+F, %s)\n",
- irn, res1, cycle->elems[i]->name, res2, cycle->elems[i + 1]->name));
-
- cpyxchg = be_new_Perm(reg_class, irg, block, 2, in);
- n_ops++;
-
- if (i > 0) {
- /* cycle is not done yet */
- int pidx = get_pairidx_for_regidx(pairs, n, cycle->elems[i]->index, 0);
-
- /* create intermediate proj */
- res1 = new_r_Proj(irg, block, cpyxchg, get_irn_mode(res1), 0);
-
- /* set as in for next Perm */
- pairs[pidx].in_node = res1;
- }
+ set_Proj_pred(res2, cpyxchg);
+ set_Proj_proj(res2, 0);
+ set_Proj_pred(res1, cpyxchg);
+ set_Proj_proj(res1, 1);
- set_Proj_pred(res2, cpyxchg);
- set_Proj_proj(res2, 0);
- set_Proj_pred(res1, cpyxchg);
- set_Proj_proj(res1, 1);
+ arch_set_irn_register(res2, cycle.elems[i + 1]);
+ arch_set_irn_register(res1, cycle.elems[i]);
- arch_set_irn_register(res2, cycle->elems[i + 1]);
- arch_set_irn_register(res1, cycle->elems[i]);
+ /* insert the copy/exchange node in schedule after the magic schedule node (see above) */
+ sched_add_after(sched_point, cpyxchg);
- /* insert the copy/exchange node in schedule after the magic schedule node (see above) */
- sched_add_after(sched_point, cpyxchg);
+ DBG((dbg, LEVEL_1, "replacing %+F with %+F, placed new node after %+F\n", irn, cpyxchg, sched_point));
- DBG((mod, LEVEL_1, "replacing %+F with %+F, placed new node after %+F\n", irn, cpyxchg, sched_point));
+ /* set the new scheduling point */
+ sched_point = res1;
+ } else {
+ ir_node *cpyxchg;
- /* set the new scheduling point */
- sched_point = res1;
- }
- else {
- DBG((mod, LEVEL_1, "%+F creating copy node (%+F, %s) -> (%+F, %s)\n",
- irn, arg1, cycle->elems[i]->name, res2, cycle->elems[i + 1]->name));
+ DBG((dbg, LEVEL_1, "%+F creating copy node (%+F, %s) -> (%+F, %s)\n",
+ irn, arg1, cycle.elems[i]->name, res2, cycle.elems[i + 1]->name));
- cpyxchg = be_new_Copy(reg_class, irg, block, arg1);
- arch_set_irn_register(cpyxchg, cycle->elems[i + 1]);
- n_ops++;
+ cpyxchg = be_new_Copy(reg_class, irg, block, arg1);
+ arch_set_irn_register(cpyxchg, cycle.elems[i + 1]);
- /* exchange copy node and proj */
- exchange(res2, cpyxchg);
+ /* exchange copy node and proj */
+ exchange(res2, cpyxchg);
- /* insert the copy/exchange node in schedule after the magic schedule node (see above) */
- sched_add_after(sched_point, cpyxchg);
+ /* insert the copy/exchange node in schedule after the magic schedule node (see above) */
+ sched_add_after(sched_point, cpyxchg);
- /* set the new scheduling point */
- sched_point = cpyxchg;
+ /* set the new scheduling point */
+ sched_point = cpyxchg;
+ }
}
}
- free((void *) cycle->elems);
- free(cycle);
+ free((void*)cycle.elems);
}
/* remove the perm from schedule */
- if (! keep_perm) {
+ if (!keep_perm) {
sched_remove(irn);
kill_node(irn);
}
return get_irn_out_edge_first_kind(irn, EDGE_KIND_NORMAL) != 0;
}
-/**
- * Skip all Proj nodes.
- */
-static INLINE ir_node *belower_skip_proj(ir_node *irn) {
- while(is_Proj(irn))
- irn = get_Proj_pred(irn);
- return irn;
-}
-
static ir_node *find_copy(ir_node *irn, ir_node *op)
{
ir_node *cur_node;
}
static void gen_assure_different_pattern(ir_node *irn, ir_node *other_different, constraint_env_t *env) {
- be_irg_t *birg = env->birg;
- ir_graph *irg = be_get_birg_irg(birg);
- ir_nodemap_t *op_set = &env->op_set;
- ir_node *block = get_nodes_block(irn);
- const arch_register_class_t *cls = arch_get_irn_reg_class(other_different, -1);
- ir_node *in[2], *keep, *cpy;
+ ir_graph *irg;
+ ir_nodemap_t *op_set;
+ ir_node *block;
+ const arch_register_class_t *cls;
+ ir_node *keep, *cpy;
op_copy_assoc_t *entry;
- DEBUG_ONLY(firm_dbg_module_t *mod = env->dbg;)
- if (arch_irn_is(other_different, ignore) ||
+ if (arch_irn_is_ignore(other_different) ||
!mode_is_datab(get_irn_mode(other_different))) {
- DBG((mod, LEVEL_1, "ignore constraint for %+F because other_irn is ignore or not a datab node\n", irn));
+ DBG((dbg_constr, LEVEL_1, "ignore constraint for %+F because other_irn is ignore or not a datab node\n", irn));
return;
}
+ irg = be_get_birg_irg(env->birg);
+ op_set = &env->op_set;
+ block = get_nodes_block(irn);
+ cls = arch_get_irn_reg_class_out(other_different);
+
/* Make a not spillable copy of the different node */
/* this is needed because the different irn could be */
/* in block far far away */
/* The copy is optimized later if not needed */
/* check if already exists such a copy in the schedule immediately before */
- cpy = find_copy(belower_skip_proj(irn), other_different);
+ cpy = find_copy(skip_Proj(irn), other_different);
if (! cpy) {
cpy = be_new_Copy(cls, irg, block, other_different);
- be_node_set_flags(cpy, BE_OUT_POS(0), arch_irn_flags_dont_spill);
- DBG((mod, LEVEL_1, "created non-spillable %+F for value %+F\n", cpy, other_different));
- }
- else {
- DBG((mod, LEVEL_1, "using already existing %+F for value %+F\n", cpy, other_different));
+ arch_irn_set_flags(cpy, arch_irn_flags_dont_spill);
+ DBG((dbg_constr, LEVEL_1, "created non-spillable %+F for value %+F\n", cpy, other_different));
+ } else {
+ DBG((dbg_constr, LEVEL_1, "using already existing %+F for value %+F\n", cpy, other_different));
}
- in[0] = irn;
- in[1] = cpy;
-
/* Add the Keep resp. CopyKeep and reroute the users */
/* of the other_different irn in case of CopyKeep. */
if (has_irn_users(other_different)) {
keep = be_new_CopyKeep_single(cls, irg, block, cpy, irn, get_irn_mode(other_different));
- be_node_set_reg_class(keep, 1, cls);
- }
- else {
+ be_node_set_reg_class_in(keep, 1, cls);
+ } else {
+ ir_node *in[2];
+
+ in[0] = irn;
+ in[1] = cpy;
keep = be_new_Keep(cls, irg, block, 2, in);
}
- DBG((mod, LEVEL_1, "created %+F(%+F, %+F)\n\n", keep, irn, cpy));
+ DBG((dbg_constr, LEVEL_1, "created %+F(%+F, %+F)\n\n", keep, irn, cpy));
/* insert copy and keep into schedule */
assert(sched_is_scheduled(irn) && "need schedule to assure constraints");
if (! sched_is_scheduled(cpy))
- sched_add_before(belower_skip_proj(irn), cpy);
+ sched_add_before(skip_Proj(irn), cpy);
sched_add_after(irn, keep);
/* insert the other different and it's copies into the map */
ir_nodeset_insert(&entry->copies, cpy);
/* insert keep in case of CopyKeep */
- if (be_is_CopyKeep(keep)) {
+ if (be_is_CopyKeep(keep))
ir_nodeset_insert(&entry->copies, keep);
- }
}
/**
* @param env the constraint environment
*/
static void assure_different_constraints(ir_node *irn, ir_node *skipped_irn, constraint_env_t *env) {
- const arch_register_req_t *req = arch_get_register_req(irn, -1);
+ const arch_register_req_t *req = arch_get_register_req_out(irn);
if (arch_register_req_is(req, must_be_different)) {
const unsigned other = req->other_different;
ref_mode_T = skip_Proj(get_irn_n(ref, 1));
obstack_grow(&obst, &ref, sizeof(ref));
- DBG((cenv->dbg, LEVEL_1, "Trying to melt %+F:\n", ref));
+ DBG((dbg_constr, LEVEL_1, "Trying to melt %+F:\n", ref));
/* check for copykeeps pointing to the same mode_T node as the reference copykeep */
for (j = 0; j < num_ck; ++j) {
if (j != idx && cur_ck && skip_Proj(get_irn_n(cur_ck, 1)) == ref_mode_T) {
obstack_grow(&obst, &cur_ck, sizeof(cur_ck));
ir_nodeset_remove(&entry->copies, cur_ck);
- DBG((cenv->dbg, LEVEL_1, "\t%+F\n", cur_ck));
+ DBG((dbg_constr, LEVEL_1, "\t%+F\n", cur_ck));
ck_arr[j] = NULL;
++n_melt;
sched_remove(cur_ck);
/* check, if we found some candidates for melting */
if (n_melt == 1) {
- DBG((cenv->dbg, LEVEL_1, "\tno candidate found\n"));
+ DBG((dbg_constr, LEVEL_1, "\tno candidate found\n"));
continue;
}
/* set register class for all kept inputs */
for (j = 1; j <= n_melt; ++j)
- be_node_set_reg_class(new_ck, j, entry->cls);
+ be_node_set_reg_class_in(new_ck, j, entry->cls);
ir_nodeset_insert(&entry->copies, new_ck);
} while (be_is_Keep(sched_pt) || be_is_CopyKeep(sched_pt));
sched_add_before(sched_pt, new_ck);
- DBG((cenv->dbg, LEVEL_1, "created %+F, scheduled before %+F\n", new_ck, sched_pt));
+ DBG((dbg_constr, LEVEL_1, "created %+F, scheduled before %+F\n", new_ck, sched_pt));
/* finally: kill the reference copykeep */
kill_node(ref);
void assure_constraints(be_irg_t *birg) {
ir_graph *irg = be_get_birg_irg(birg);
constraint_env_t cenv;
- ir_node **nodes;
ir_nodemap_iterator_t map_iter;
ir_nodemap_entry_t map_entry;
- FIRM_DBG_REGISTER(firm_dbg_module_t *mod, "firm.be.lower.constr");
- DEBUG_ONLY(cenv.dbg = mod;)
- cenv.birg = birg;
+ FIRM_DBG_REGISTER(dbg_constr, "firm.be.lower.constr");
+
+ cenv.birg = birg;
ir_nodemap_init(&cenv.op_set);
obstack_init(&cenv.obst);
/* for all */
foreach_ir_nodemap(&cenv.op_set, map_entry, map_iter) {
- op_copy_assoc_t *entry = map_entry.data;
- int n;
- ir_node *cp;
- ir_nodeset_iterator_t iter;
+ op_copy_assoc_t *entry = map_entry.data;
+ int n = ir_nodeset_size(&entry->copies);
+ ir_node **nodes = ALLOCAN(ir_node*, n);
+ ir_node *cp;
+ ir_nodeset_iterator_t iter;
be_ssa_construction_env_t senv;
- n = ir_nodeset_size(&entry->copies);
- nodes = alloca(n * sizeof(nodes[0]));
-
/* put the node in an array */
- DBG((mod, LEVEL_1, "introduce copies for %+F ", map_entry.node));
+ DBG((dbg_constr, LEVEL_1, "introduce copies for %+F ", map_entry.node));
/* collect all copies */
n = 0;
foreach_ir_nodeset(&entry->copies, cp, iter) {
nodes[n++] = cp;
- DB((mod, LEVEL_1, ", %+F ", cp));
+ DB((dbg_constr, LEVEL_1, ", %+F ", cp));
}
- DB((mod, LEVEL_1, "\n"));
+ DB((dbg_constr, LEVEL_1, "\n"));
/* introduce the copies for the operand and it's copies */
be_ssa_construction_init(&senv, birg);
/* so we transform unnecessary ones into Keeps. */
foreach_ir_nodeset(&entry->copies, cp, iter) {
if (be_is_CopyKeep(cp) && get_irn_n_edges(cp) < 1) {
- ir_node *keep;
- int n = get_irn_arity(cp);
+ const arch_register_class_t *cls = arch_get_irn_reg_class_out(cp);
+ int n = get_irn_arity(cp);
+ ir_node *keep;
- keep = be_new_Keep(arch_get_irn_reg_class(cp, -1),
- irg, get_nodes_block(cp), n, get_irn_in(cp) + 1);
+ keep = be_new_Keep(cls, irg, get_nodes_block(cp), n, get_irn_in(cp) + 1);
sched_add_before(cp, keep);
/* Set all ins (including the block) of the CopyKeep BAD to keep the verifier happy. */
* @note This routine needs interference.
* @note Probably, we can implement it a little more efficient.
* Especially searching the frontier lazily might be better.
- * @param perm The perm.
- * @param data The walker data (lower_env_t).
+ *
+ * @param perm The perm
+ * @param env The lowerer environment
+ *
* @return 1, if there is something left to perm over.
* 0, if removed the complete perm.
*/
-static int push_through_perm(ir_node *perm, void *data)
+static int push_through_perm(ir_node *perm, lower_env_t *env)
{
- lower_env_t *env = data;
-
ir_graph *irg = get_irn_irg(perm);
ir_node *bl = get_nodes_block(perm);
ir_node *node;
int n_moved;
int new_size;
ir_node *frontier = bl;
- FIRM_DBG_REGISTER(firm_dbg_module_t *mod, "firm.be.lower.permmove");
-
+ ir_node *irn;
int i, n;
- const ir_edge_t *edge;
- ir_node *one_proj = NULL, *irn;
- const arch_register_class_t *cls = NULL;
-
- DBG((mod, LEVEL_1, "perm move %+F irg %+F\n", perm, irg));
/* get some Proj and find out the register class of that Proj. */
- edge = get_irn_out_edge_first_kind(perm, EDGE_KIND_NORMAL);
- one_proj = get_edge_src_irn(edge);
+ const ir_edge_t *edge = get_irn_out_edge_first_kind(perm, EDGE_KIND_NORMAL);
+ ir_node *one_proj = get_edge_src_irn(edge);
+ const arch_register_class_t *cls = arch_get_irn_reg_class_out(one_proj);
assert(is_Proj(one_proj));
- cls = arch_get_irn_reg_class(one_proj, -1);
+
+ DBG((dbg_permmove, LEVEL_1, "perm move %+F irg %+F\n", perm, irg));
/* Find the point in the schedule after which the
* potentially movable nodes must be defined.
* the former dead operand would be live now at the point of
* the Perm, increasing the register pressure by one.
*/
- sched_foreach_reverse_from (sched_prev(perm), irn) {
+ sched_foreach_reverse_from(sched_prev(perm), irn) {
for (i = get_irn_arity(irn) - 1; i >= 0; --i) {
ir_node *op = get_irn_n(irn, i);
if (arch_irn_consider_in_reg_alloc(cls, op) &&
}
found_front:
- DBG((mod, LEVEL_2, "\tfrontier: %+F\n", frontier));
+ DBG((dbg_permmove, LEVEL_2, "\tfrontier: %+F\n", frontier));
node = sched_prev(perm);
n_moved = 0;
- while(!sched_is_begin(node)) {
+ while (!sched_is_begin(node)) {
const arch_register_req_t *req;
int input = -1;
ir_node *proj;
}
}
/* it wasn't an input to the perm, we can't do anything more */
- if(input < 0)
+ if (input < 0)
break;
- if(!sched_comes_after(frontier, node))
+ if (!sched_comes_after(frontier, node))
break;
if (arch_irn_is(node, modify_flags))
break;
- if(is_Proj(node)) {
- req = arch_get_register_req(get_Proj_pred(node),
- -1 - get_Proj_proj(node));
- } else {
- req = arch_get_register_req(node, -1);
- }
- if(req->type != arch_register_req_type_normal)
+ req = arch_get_register_req_out(node);
+ if (req->type != arch_register_req_type_normal)
break;
- for(i = get_irn_arity(node) - 1; i >= 0; --i) {
+ for (i = get_irn_arity(node) - 1; i >= 0; --i) {
ir_node *opop = get_irn_n(node, i);
if (arch_irn_consider_in_reg_alloc(cls, opop)) {
break;
}
}
- if(i >= 0)
+ if (i >= 0)
break;
- DBG((mod, LEVEL_2, "\tmoving %+F after %+F, killing %+F\n", node, perm, proj));
+ DBG((dbg_permmove, LEVEL_2, "\tmoving %+F after %+F, killing %+F\n", node, perm, proj));
/* move the movable node in front of the Perm */
sched_remove(node);
new_size = arity - n_moved;
if(new_size == 0) {
+ sched_remove(perm);
+ kill_node(perm);
return 0;
}
- map = alloca(new_size * sizeof(map[0]));
- proj_map = alloca(arity * sizeof(proj_map[0]));
+ map = ALLOCAN(int, new_size);
+ proj_map = ALLOCAN(int, arity);
memset(proj_map, -1, sizeof(proj_map[0]));
n = 0;
- for(i = 0; i < arity; ++i) {
- if(bitset_is_set(moved, i))
+ for (i = 0; i < arity; ++i) {
+ if (bitset_is_set(moved, i))
continue;
map[n] = i;
proj_map[i] = n;
return;
perm_stayed = push_through_perm(irn, walk_env);
- if (!perm_stayed)
- return;
-
- lower_perm_node(irn, walk_env);
+ if (perm_stayed)
+ lower_perm_node(irn, walk_env);
}
/**
*/
void lower_nodes_after_ra(be_irg_t *birg, int do_copy) {
lower_env_t env;
- ir_graph *irg = be_get_birg_irg(birg);
+ ir_graph *irg;
+
+ FIRM_DBG_REGISTER(dbg, "firm.be.lower");
+ FIRM_DBG_REGISTER(dbg_permmove, "firm.be.lower.permmove");
env.birg = birg;
env.do_copy = do_copy;
- FIRM_DBG_REGISTER(env.dbg_module, "firm.be.lower");
/* we will need interference */
be_liveness_assure_chk(be_get_birg_liveness(birg));
+ irg = be_get_birg_irg(birg);
irg_walk_graph(irg, NULL, lower_nodes_after_ra_walker, &env);
}