* @file
* @brief Flags to control optimizations.
* @author Christian Schaefer, Goetz Lindenmaier, Michael Beck
- * @version $Id$
- * @summary
+ */
+#ifndef FIRM_IR_IRFLAG_H
+#define FIRM_IR_IRFLAG_H
+
+#include "firm_types.h"
+#include "begin.h"
+
+/**
+ * @ingroup iroptimize
+ * @defgroup Optimization Flags
* Flags to customize the behavior of libfirm.
*
* There are the following groups of flags:
- * 1. Optimization flags.
- * a) There is a flag, 'optimize' to turn on/off all optimizations.
- * b) There are flags for each individual optimization. Some flags turns
+ * -# Optimization flags.
+ * -# There is a flag, 'optimize' to turn on/off all optimizations.
+ * -# There are flags for each individual optimization. Some flags turns
* transformations in several algorithms on/off.
- * 2. Normalization flags.
+ * -# Normalization flags.
* These flags steer transformations of the ir that improve it, as removing
* dump Phi nodes (one predecessor, all predecessors are equal ...), Ids, Tuples ...
- * 3. Verbosity flags.
- * a) Flags to steer the level of the information.
- * b) Flags to steer in which phase information should be dumped.
- * 4. Verification flag
- * This one controls the behavior of node and type verifications
+ * -# Verbosity flags.
+ * -# Flags to steer the level of the information.
+ * -# Flags to steer in which phase information should be dumped.
+ *@{
*/
-#ifndef FIRM_IR_IRFLAG_H
-#define FIRM_IR_IRFLAG_H
-
-#include "firm_types.h"
/**
* A container type to load/restore all optimizations
* If optimize == 0 no optimizations are performed at all.
* Default: optimize == 1.
*/
-void set_optimize(int value);
-int get_optimize(void);
+FIRM_API void set_optimize(int value);
+/** Returns global optimizations flag.
+ * @see set_optimize() */
+FIRM_API int get_optimize(void);
/** Enables/Disables constant folding optimization.
*
* constant expression evaluation (2 + 5 ==> 7, 3 < 2 ==> false)
* Default: opt_constant_folding == 1.
*/
-void set_opt_constant_folding(int value);
+FIRM_API void set_opt_constant_folding(int value);
+/** returns 0 if constant_folding is disabled, !=0 otherwise */
+FIRM_API int get_opt_constant_folding(void);
/** Enables/Disables algebraic simplifications.
*
* - simplification of tests ( !(a < b) ==> (a >= b))
* Default: opt_algebraic_simplification == 1.
*/
-void set_opt_algebraic_simplification(int value);
+FIRM_API void set_opt_algebraic_simplification(int value);
/** Enables/Disables common subexpression elimination.
*
* If opt_cse == 1 perform common subexpression elimination.
* Default: opt_cse == 1.
*/
-void set_opt_cse(int value);
+FIRM_API void set_opt_cse(int value);
/** Returns constant folding optimization setting. */
-int get_opt_cse(void);
+FIRM_API int get_opt_cse(void);
/** Enables/Disables global constant subexpression elimination.
*
* right after a call to local_optimize with global cse turned on.
* Default: opt_global_cse == 0.
*/
-void set_opt_global_cse(int value);
-
-/** Enables/Disables usage of combo algorithm.
- *
- * If opt_combo == 1 perform combo optimization
- * instead of combinations of optimiza_graph_df()/
- * optimize_graph_cf()
- * Default: opt_combo == 1.
- */
-void set_opt_combo(int value);
-
-/** Enables/Disables strength reduction.
- *
- * If opt_strength_red == 1 perform strength reduction.
- * See strenth_red.h.
- *
- * Default: opt_strength_red = 1;
- */
-void set_opt_strength_red(int value);
-
-/** Enables/Disables unreachable code elimination.
- *
- * If set, evaluate conditions of conditional branch and replace the
- * branch with a Jmp/Bad Tuple.
- *
- * If opt_unreachable_code == 1 replace nodes (except Block,
- * Phi and Tuple) with a Bad predecessor by the Bad node.
- * Default: opt_unreachable_code == 1.
- */
-void set_opt_unreachable_code(int value);
-
-/** Enables/Disables control flow optimizations.
- *
- * Performs Straightening, if simplifications and loop simplifications.
- * Sets all separate control flow flags (control_flow_straightening,
- * weak_simplification, strong_simplification and critical_edges).
- */
-void set_opt_control_flow(int value);
-
-/** Enables/Disables Straightening. */
-void set_opt_control_flow_straightening(int value);
-
-/** Enables/Disables if simplifications in local optimizations. */
-void set_opt_control_flow_weak_simplification(int value);
-
-/** Enables/Disables strong if and loop simplification (in optimize_cf). */
-void set_opt_control_flow_strong_simplification(int value);
-
-/** Enable/Disable optimization of dynamic method dispatch.
- *
- * This flag enables/disables the optimization of dynamic method dispatch.
- * If the flag is turned on Sel nodes can be replaced by Const nodes representing
- * the address of a function.
- */
-void set_opt_dyn_meth_dispatch(int value);
-int get_opt_dyn_meth_dispatch(void);
-
-/** Enable/Disable type optimization of cast nodes.
- *
- * Controls the optimizations in tropt.h. Default: on.
- */
-void set_opt_optimize_class_casts(int value);
+FIRM_API void set_opt_global_cse(int value);
/** Restricts the behavior of cast optimization.
*
* illegal as in (Super)(Sub) (new Super()). Default:
* 0 == not suppressed.
*/
-void set_opt_suppress_downcast_optimization(int value);
-int get_opt_suppress_downcast_optimization(void);
-
-/** Enable/Disable floating of fragile ops.
- *
- * This flags enables/disables the floating of fragile operations.
- * If this flag is on, fragile operations which are known to NOT raise
- * an exception can be place to other basic blocks.
- * Otherwise they remain in the block they were created.
- */
-void set_opt_fragile_ops(int value);
-
-/**
- * Enable/Disable Confirm node removal during local optimization.
- */
-void set_opt_remove_confirm(int value);
-
-/**
- * Enable/Disable scalar replacement optimization.
- */
-void set_opt_scalar_replacement(int value);
-
-/**
- * Enable/Disable Null exception in Load and Store nodes only.
- *
- * If enabled, only Null pointer exception can occur at Load and
- * store nodes. If it can be proved that the address input of these
- * nodes is non-null, the exception edge can safely be removed.
- * If disabled, other exceptions (like unaligned access, read-only memory,
- * etc.) can occur.
- *
- * This flag is enabled by default.
- */
-void set_opt_ldst_only_null_ptr_exceptions(int value);
-
-/**
- * Enable/Disable Selection based Null pointer check elimination.
- *
- * In languages, where all addresses are always Sel nodes, Null
- * pointers can only occur as input to Sel nodes.
- * If Null pointers are the only source for exceptions in Load and
- * Store nodes (as typical in high level languages), we can eliminate
- * exception edges from Load and Store when can prove that the Sel
- * nodes representing the Load/Store address have non-null inputs.
- * Enabling this flag enables this elimination.
- *
- * Enabling this flag is meaningless if ldst_non_null_exceptions is
- * enabled.
- *
- * This flag should be set for Java style languages.
- */
-void set_opt_sel_based_null_check_elim(int value);
+FIRM_API void set_opt_suppress_downcast_optimization(int value);
+/** Returns suppred_downcast flag.
+ * @see set_opt_suppress_downcast_optimization() */
+FIRM_API int get_opt_suppress_downcast_optimization(void);
/**
* Enable/Disable Global Null Pointer Test Elimination.
*
* This flag should be set for C style languages.
*/
-void set_opt_global_null_ptr_elimination(int value);
+FIRM_API void set_opt_global_null_ptr_elimination(int value);
/**
* Enable/Disable Automatic construction of Sync nodes during
*
* This flag should be set for Java style languages.
*/
-void set_opt_auto_create_sync(int value);
-
-/** Enable/Disable normalizations of the firm representation.
- *
- * This flag guards transformations that normalize the Firm representation
- * as removing Ids and Tuples, useless Phis, replacing SymConst(id) by
- * Const(entity) and others.
- * The transformations guarded by this flag are not guarded by flag
- * "optimize".
- * Many algorithms operating on Firm can not deal with constructs in
- * the non-normalized representation.
- * default: ON
- *
- * @note ATTENTION: not all such transformations are guarded by a flag.
- */
-void set_opt_normalize(int value);
-
-/** Enable/Disable precise exception context.
- *
- * If enabled, all exceptions form a barrier for values, as in the
- * following example:
- *
- * @code
- * a = 1;
- * b = 3 / 0;
- * a = 2;
- * @endcode
- *
- * If precise exception handling is enabled, an exception handler see a == 1,
- * else it might see a == 2.
- * Enable this for languages with strict exception order like Java.
- */
-void set_opt_precise_exc_context(int value);
+FIRM_API void set_opt_auto_create_sync(int value);
/** Enable/Disable Alias analysis.
*
* If enabled, memory disambiguation by alias analysis is used.
*/
-void set_opt_alias_analysis(int value);
+FIRM_API void set_opt_alias_analysis(int value);
/** Enable/Disable closed world assumption.
*
* external types or callers exist.
* This enables some powerful optimizations.
*/
-void set_opt_closed_world(int value);
+FIRM_API void set_opt_closed_world(int value);
/**
* Save the current optimization state.
*/
-void save_optimization_state(optimization_state_t *state);
+FIRM_API void save_optimization_state(optimization_state_t *state);
/**
* Restore the current optimization state.
*/
-void restore_optimization_state(const optimization_state_t *state);
+FIRM_API void restore_optimization_state(const optimization_state_t *state);
/**
* Switches ALL optimizations off.
*/
-void all_optimizations_off(void);
+FIRM_API void all_optimizations_off(void);
+
+/** @} */
+
+/** @ingroup irverify
+ * @defgroup irverify_flags Flags
+ * Enable/Disable automatic correctness tests
+ * @{
+ */
/**
* Possible verification modes.
*/
-typedef enum _firm_verification_t {
- FIRM_VERIFICATION_OFF = 0, /**< do not verify nodes at all */
- FIRM_VERIFICATION_ON = 1, /**< do node verification and assert on error in debug version */
- FIRM_VERIFICATION_REPORT = 2, /**< do node verification, but report to stderr only */
- FIRM_VERIFICATION_ERROR_ONLY = 3 /**< do node verification, but NEVER do assert nor report */
+typedef enum firm_verification_t {
+ FIRM_VERIFICATION_OFF = 0, /**< do not verify nodes at all */
+ FIRM_VERIFICATION_ON = 1, /**< do node verification and assert on error in debug version */
+ FIRM_VERIFICATION_REPORT = 2, /**< do node verification, but report to stderr only */
+ FIRM_VERIFICATION_ERROR_ONLY = 3 /**< do node verification, but NEVER do assert nor report */
} firm_verification_t;
-/** Select verification of IR nodes and types.
+/**
+ * Select verification of IR nodes and types.
*
- * Per default the verification is in mode NODE_VERIFICATION_ASSERT.
- * Turn the verification off during development to check partial implementations.
+ * Per default the verification is in mode NODE_VERIFICATION_ASSERT.
+ * Turn the verification off during development to check partial
+ * implementations.
*/
-void do_node_verification(firm_verification_t mode);
+FIRM_API void do_node_verification(firm_verification_t mode);
+
+/** @} */
+
+#include "end.h"
#endif