3 * File name: ir/ir/irflag.h
4 * Purpose: Flags to control optimizations.
5 * Author: Christian Schaefer, Goetz Lindenmaier
6 * Modified by: Michael Beck
9 * Copyright: (c) 1999-2003 Universität Karlsruhe
10 * Licence: This file protected by GPL - GNU GENERAL PUBLIC LICENSE.
16 * Flags to customize the behaviour of libfirm.
18 * @author Christian Schaefer
20 * There are the following groups of flags:
21 * 1. Optimization flags.
22 * a) There is a flag, 'optimize' to turn on/off all optimizations.
23 * b) There are flags for each individual optimization. Some flags turns
24 * transformations in several algorithms on/off.
25 * 2. Normalization flags.
26 * These flags steer transformations of the ir that improve it, as removing
27 * dump Phi nodes (one predecessor, all preds are equal ...), Ids, Tuples ...
29 * a) Flags to steer the level of the information.
30 * b) Flags to steer in which phase information should be dumped.
38 * A container type to load/restore all optimizations
40 typedef unsigned optimization_state_t;
43 * This function enables/disables optimizations globally.
45 * If optimize == 0 no optimizations are performed at all.
46 * Default: optimize == 1.
48 void set_optimize (int value);
49 int get_optimize(void);
51 /** This function enables/disables output of information about phases and
52 * controls the verbosity level.
54 * 0: no output at all.
55 * 1: very short output
56 * >>1: very verbose output.
58 void set_firm_verbosity (int value);
59 int get_firm_verbosity (void);
61 /** Enables/Disables constant folding optimization.
63 * If opt_constant_folding == 1 perform
64 * - constant expression evaluation (2 + 5 ==> 7, 3 < 2 ==> false)
65 * - algebraic simplification (a * 0 ==> 0, a or a ==> a)
66 * - simplification of tests ( !(a < b) ==> (a >= b))
67 * - refining the memory representation
68 * - remove store after load
69 * Default: opt_constant_folding == 1.
71 void set_opt_constant_folding (int value);
73 /** Enables/Disables loop unrolling.
75 * If opt_loop_unrolling == 1 perform loop_unrolling.
76 * See loop_unrolling.h.
78 * Default: opt_loop_unrolling = 1;
80 void set_opt_loop_unrolling (int value);
82 /** Enables/Disables output of information about loop unrolling.
84 void set_opt_loop_unrolling_verbose (int value);
86 /** Enables/Disables removal of redundant Loads and Stores.
88 * - Remove Store that overwrites a just stored value (WAW).
89 * - Remove Store if it stores a value just loaded (WAR with the same value).
90 * - Remove Load that loads a value just saved (RAW with the same value).
91 * - remove Load that loads a value already loaded (RAR)
92 * - replace Load of constant values with constants (RC)
94 void set_opt_redundant_LoadStore(int value);
96 /** Enables/Disables constant subexpression elimination.
98 * If opt_cse == 1 perform constant subexpression elimination.
99 * Default: opt_cse == 1.
101 void set_opt_cse (int value);
103 /** Returns constant folding optimization setting. */
104 int get_opt_cse(void);
106 /** Enables/Disables global constant subexpression elimination.
108 * If opt_global_cse == 1 and opt_cse == 1 perform intra procedure
109 * constant subexpression elimination for floating nodes. Intra
110 * procedure cse gets the graph into state "floating". It is necessary
111 * to run pre/code motion to get the graph back into state "op_pin_state_pinned".
112 * right after a call to local_optimize with global cse turned on.
113 * Default: opt_global_cse == 0.
115 void set_opt_global_cse (int value);
117 /** Enables/Disables strength reduction.
119 * If opt_strength_red == 1 perform strength reduction.
122 * Default: opt_strength_red = 1;
124 void set_opt_strength_red (int value);
126 /** Enables/Disables output of information about strength reduction.
128 void set_opt_strength_red_verbose (int value);
130 /** Enables/Disables unreachable code elimination.
132 * If set, evaluate conditions of conditional branch and replace the
133 * branch with a Jmp/Bad Tuple.
135 * If opt_unreachable_code == 1 replace nodes (except Block,
136 * Phi and Tuple) with a Bad predecessor by the Bad node.
137 * Default: opt_unreachable_code == 1.
139 void set_opt_unreachable_code(int value);
141 /** Enables/Disables control flow optimizations.
143 * Performs Straightening, if simplifications and loop simplifications.
144 * Sets all separate control flow flags (control_flow_straightening,
145 * weak_simplification, strong_simplification and critical_edges).
147 void set_opt_control_flow(int value);
149 /** Enables/Disables Straightening. */
150 void set_opt_control_flow_straightening(int value);
152 /** Enables/Disables if simplifications in local optimizations. */
153 void set_opt_control_flow_weak_simplification(int value);
155 /** Enables/Disables strong if and loop simplification (in optimize_cf). */
156 void set_opt_control_flow_strong_simplification(int value);
158 /** Enables/Disables removal of critical control flow edges. */
159 void set_opt_critical_edges(int value);
161 /** Enables/Disables reassociation.
163 * If opt_reassociation == 1 reassociation is performed.
164 * Default: opt_reassociation == 1.
166 void set_opt_reassociation(int value);
168 /** Enables/Disables dead node elimination.
170 * If opt_dead_node_elimination == 1 deallocate all dead nodes
171 * by copying the firm graph.
172 * Default: opt_dead_node_elimination == 1. */
173 void set_opt_dead_node_elimination (int value);
175 /** Enables/Disables dead method elimination.
177 * If opt_dead_method_elimination == 1 methods never called are
179 * Default: opt_dead_method_elimination == 1. */
180 void set_opt_dead_method_elimination (int value);
181 void set_opt_dead_method_elimination_verbose (int value);
183 /** Enable/Disables inlining.
185 * If opt_inline == 1 the inlining transformation is performed.
187 void set_opt_inline (int value);
189 /** Enable/Disable optimization of dynamic method dispatch.
191 * This flag enables/disables the optimization of dynamic method dispatch.
192 * If the flag is turned on Sel nodes can be replaced by Const nodes representing
193 * the address of a function.
195 void set_opt_dyn_meth_dispatch (int value);
196 int get_opt_dyn_meth_dispatch (void);
198 /** Enable/Disable type optimization of cast nodes.
200 * Controls the optimizations in tropt.h. Default: on.
202 void set_opt_optimize_class_casts (int value);
203 int get_opt_optimize_class_casts (void);
204 void set_opt_optimize_class_casts_verbose (int value);
205 int get_opt_optimize_class_casts_verbose (void);
207 /** Restricts the behaviour of cast optimization.
209 * If set, downcast are not optimized if they might be
210 * illegal as in (Super)(Sub) (new Super()). Default:
211 * 0 == not suppressed.
213 void set_opt_suppress_downcast_optimization(int value);
214 int get_opt_suppress_downcast_optimization(void);
216 /** Enable/Disable optimization of tail-recursion calls.
218 * This flag enables/disables the optimization tail-recursion call.
219 * If the flag is turned on tail-recursion calls are optimized into loops.
221 void set_opt_tail_recursion(int value);
222 void set_opt_tail_recursion_verbose(int value);
224 /** Enable/Disable floating of fragile ops.
226 * This flags enables/disables the floating of fragile operations.
227 * If this flag is on, fragile operations which are known to NOT raise
228 * an exception can be place to other basic blocks.
229 * Otherwise they remain in the block they were created.
231 void set_opt_fragile_ops(int value);
234 * Enable/Disable if conversion.
236 * If conversion tries to turn Conds into Mux nodes to eliminate
239 void set_opt_if_conversion(int value);
242 * Enable/Disable real function call optimization.
244 * Real function call optimization detects "real functions" and
245 * allows the floationg of Call nodes.
247 void set_opt_real_function_call(int value);
249 /** Enable/Disable normalizations of the firm representation.
251 * This flag guards transformations that normalize the firm representation
252 * as removing Ids and Tuples, useless Phis, replacing SymConst(id) by
253 * Const(entity) and others.
254 * The transformations guarded by this flag are not guarded by flag
256 * Many algorithms operating on firm can not deal with constructs in
257 * the non-normalized representation.
259 * @@@ ATTENTION: not all such transformations are guarded by a flag.
261 void set_opt_normalize (int value);
264 /** Enable/Disable precise exception context. */
265 void set_opt_precise_exc_context(int value);
268 * Save the current optimization state.
270 void save_optimization_state(optimization_state_t *state);
273 * Restore the current optimization state.
275 void restore_optimization_state(const optimization_state_t *state);